The quick answer: there is no single number, so how many bromine tablets a hot tub needs depends on your tablet's label. EPA-registered labels we read range from 1 tablet per 150 gallons to 3 tablets per 100 gallons, and some simply say to fill the feeder. Follow the product label for your first load. Then set the floater by your test result, aiming for 4 to 6 ppm.
The calculator below works out granule, shock and start-up amounts for your tub's volume. For tablets, the label gives the starting count and your test tells you whether it is right.
What the labels say
Each row is the spa directions from a label in EPA's pesticide label database. These are examples, not recommendations, and some are older versions of a label. Your own label decides.
| Label | Spa directions | Added |
|---|---|---|
| Hydrobrom tablets | 1 tablet per 150 gallons, or fraction | As needed |
| Spa Brom tablets | 3 tablets per 100 gallons, or fraction | Keep the residual |
| Maxibrom tablets | 3 tablets per 100 gallons, or fraction | As needed |
| Halobrom Mini tablets | 3 tablets per 300 gallons | Every 5 to 7 days |
| BioGuard Master BCDMH | Fill the feeder and adjust it; one floating dispenser per 350 gallons | Check regularly |
Two things stand out. The counts differ by label, and one of these is a mini tablet, so a count from another product doesn't carry over to yours. And the feeder setting changes the result as much as the count does, which is why every label ends the same way: keep the reading in range.
Inflatable and small tubs
Work from your tub's real volume, not a guess. The how many gallons in a hot tub guide shows how to find it. Inflatable tubs are usually at the small end, so a floater left wide open can overshoot. Start with the opening low, test often in the first days, and open it only if the reading stays under 4 ppm. See inflatable hot tub chemicals for the rest of the routine.
How to set the floater
- Check the bank first. Tablets work best on a fresh fill that has a bromide bank. In 400 gallons, that is 2.1 oz (59 g) of sodium bromide, then 0.57 oz (16 g) of 45% MPS. The how much bromine guide has the full start-up.
- Load your label's count. Use only tablets made for spas, in the feeder type your label names. Never add other chemicals to the feeder. Follow the product label.
- Set the vents. Follow the floater's instructions. If they give no setting, start low in a small tub.
- Test. One floater label says to test about every 2 hours while you set it. Test at least daily during the first week, and before each soak.
- Adjust one thing at a time. Low reading: open the vents a little. High reading: close them a little or lift the floater out. Log each change in Spa Calc for iPhone so you can see which setting held.
- Top up when tablets run low. Follow your label's schedule, and don't overload the floater to stretch the time between refills.
What level are you aiming for?
CDC lists bromine at 4 to 8 ppm for hot tubs. We use 4 to 6 ppm as the soaking range, and never above 8 ppm. Older labels in the table list 2 to 4 ppm for home spas, so you may see that number on yours. If a reading is above 6 ppm, wait and retest.
When can you soak? Soak when free chlorine is 3 to 5 ppm and at least 7.5% of your CYA (bromine 4 to 6) and pH is 7.2 to 7.8, at least 15 minutes after adding anything (20 after pH decreaser); after chlorine, bromine or a shock, test again first. Above 5 ppm chlorine or 6 ppm bromine, wait and retest in an hour or two; never soak above 10 ppm chlorine or 8 ppm bromine, or with pH below 7.0 or above 7.8. Below 3 ppm chlorine (4 bromine), add sanitizer first; at pH 7.0 to 7.2, raise pH first; with CYA above 40 ppm, drain and refill. Hot tub limits based on CDC guidance and EPA product labels.
If the reading won't behave
Stuck low with tablets in the floater:
- No bank. A refill removes it. Add sodium bromide, then the small oxidizer dose.
- Heavy use. Shock to turn used bromide back into bromine. See hot tub shock: how long to wait.
- Vents too low, or tablets gone. Open a notch or refill.
Climbing on quiet weeks:
- A floater keeps dissolving when nobody soaks. Close the vents down, or take it out for a while.
- With the floater out and the cover off, run the jets and retest.
More tablets rarely fix a low reading when the real cause is the bank or the shock.
Common mistakes
- Copying someone else's count. Their tablets, floater and tub may all differ from yours.
- Filling the floater "to be safe". The reading can creep up for days and comes down slowly.
- Setting it once and never testing. Heat, use and water age all change how fast bromine is used. Spa Calc reminds you when to retest.
- Using pool chlorine tablets in a bromine floater. Never do this, and never store them together.
Track it in Spa Calc
Spa Calc works out your bromine start-up for your tub's volume, keeps your tests and floater changes in one log, and shows whether your reading is ready to soak. Get Spa Calc for iPhone and log your next test.
Sources
- EPA label: Hydrobrom and Maxibrom Slow Dissolving Brominating Tablets: 1 tablet per 150 gallons and 3 tablets per 100 gallons; feeder use; 2 to 4 ppm for residential spas.
- EPA label: Spa Brom Tablets: 3 tablets per 100 gallons, or fraction.
- EPA label: Halobrom Mini Slow Dissolving Brominating Tablets: 3 tablets per 300 gallons, every 5 to 7 days, with a floating feeder or brominator.
- EPA label: BioGuard Master BCDMH: fill the feeder, one floating dispenser per 350 gallons, test about every 2 hours while setting it.
- Orenda: Hi-Temp Spa Brominating Tabs product page: fill the feeder, adjust it to hold the residual, and check it regularly.
- CDC: What You Can Do to Stay Healthy in Hot Tubs: bromine 4 to 8 ppm.
- CDC: Controlling Legionella in Hot Tubs: bromine 4 to 8 ppm as a control limit.
- Every dose and limit that isn't quoted from a label above comes from the same chemistry engine as Spa Calc.
Safety
- Keep chemicals out of reach of children and pets, and keep them out of the water until it is back in range.
- Never mix chemicals. Never add acid and chlorine together: mixing them releases toxic chlorine gas.
- Add chemicals to water, never water to chemicals.
- Store chemicals sealed, cool and dry, apart from each other.
- Read and follow the product label. It always comes first.